FAAC H4, Инструкция по установке и эксплуатации, Страница: 21 / 36

21
„ „
Test for registering the first telephone number
Press for more than 30 seconds the transmission
control unit's TEST push-button. It will call the first
registered number.
„ „
Test for checking if the transmission control unit
engages the line.
Make a telephone call to a friend or neighbour, with
the phone connected to the control unit's line. While
you remain on the line, ensure that, with the alarm
system enabled, the alarm is tripped, by simulating
an intrusion (e.g. open a door on which an opening
detector is installed).
Make sure that the telephone call was interrupted.
„ „
Test for checking if the external telephone call
is made.
Trip the alarm by simulating an intrusion (e.g. by
passing front of a movement detector).
Inform the recipients on the procedure to follow
when the alarm telephone call begins (refer to
paragraph "How to manage an alarm"), telling them
not to answer the call, in order not to stop the cycle
of telephone calls.
After about ten minutes, contact the persons, to
check if they actually received the alarm telephone
call.
BeeP