![background image](http://html2.mh-extra.com/html/faac/fsl700/fsl700_user-manual_3193998014.webp)
G
G
ATE
ATE
O
O
PERATOR
PERATOR
I
I
NSTALLATION
NSTALLATION
L
IMIT
S
WITCH
S
ETUP
:
The gate operator uses a limit switch assembly to adjust the distance of travel. These adjustments should be made before
power is supplied to the operator. To adjust the distance of travel using the limits:
1. Turn power OFF! Use the power switch on the side to assure AC and Battery power are both OFF.
2. Manually move the gate fully to the right. Push the limit guide plate down and roll the top limit nut until it activates the
top limit switch. The switch will click when activated.
3. Manually move the gate to the left. Push the limit guide plate down and roll the bottom limit nut until it activates the
bottom limit switch. The switch will click when activated.
4. Release the limit guide plate and make sure it is engaged in the slots of each limit nut.
5. Readjust the limit nuts as necessary to fine tune the full-open and full-closed positions.
G
ATE
O
PERATOR
D
IRECTION
:
The gate operator uses a DIP switch setting to determine the open and close direction. To set the Open/Close direction:
1. Turn power OFF! Use the power switch on the side to assure AC and Battery power are both OFF.
2. Standing inside the gate looking at the gate operator, determine if the gate opens to the LEFT or RIGHT.
3. If the gate opens to the LEFT, move DIP SWITCH 6 to the Left.
4. If the gate opens to the RIGHT, move DIP SWITCH 6 to the Right.
RIGHT
LEFT
Opens LEFT
Switch
6:
Opens
Switch
6:
FSL700 Slide Gate Operator
14