18
50
250
200
50
ENGLISH
fig. 20
fig. 21
next fit the external carriage unit fig.20 Ref.
laterally.
3 bars measuring 2 metres each will be provided, and will be aligned and cut to measure according to the
3 bars measuring 2 metres each will be provided, and will be aligned and cut to measure according to the
head profile length LT. Refer to the tables in fig.6 and fig.8 for cutting the bar to measure.
head profile length LT. Refer to the tables in fig.6 and fig.8 for cutting the bar to measure.
Insert the 3 bars in the profile from the 200 mm side fig.21 Ref.
Insert the 3 bars in the profile from the 200 mm side fig.21 Ref.
The terminal will be 50 mm fig.21 Ref.
The terminal will be 50 mm fig.21 Ref.
Then position the bars correctly, place the telescopic profile up against the main profile
Then position the bars correctly, place the telescopic profile up against the main profile
and secure it using the hex head screws with washers fig.21 Ref.
and secure it using the hex head screws with washers fig.21 Ref.
