FAAC 724D, Руководство пользователя, Страница: 15 / 76

13
ENGLISH
CE DECLARATION OF CONFORMITY
Manufacturer: FAAC S.p.A.
Address : Via Benini, 1 - 40069 - Zola Predosa - Bologna - ITALY
Declares that: Control unit mod. 724D
conforms to the essential safety requirements of the following EEC directives:
2006/95/EC Low Voltage directive.
2004/108/EC Electromagnetic Compatibility directive.
Additional information:
This product underwent a test in a typical uniform configuration (all products manufactured by FAAC S.p.A.).
Bologna, 01 September 2008
Managing Director
A. Marcellan
•
•
•
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the
automated system.
The symbol draws your attention to the notes on the characteristics and operation of the product.
INDEX
1. GENERAL CHARACTERISTICS page 14
2. TECHNICAL SPECIFICATIONS page 14
3. PREPARATIONS page 14
4. BOARD LAY-OUT page 15
5. CONNECTIONS AND OPERATION page 15
5.1. TERMINAL BOARD CN1 page 15
5.2. TERMINAL BOARD CN2 page 16
5.3. TERMINAL BOARD CN3 page 16
5.4. TERMINAL BOARD CN4 page 17
6. INSTALLING THE RADIO CONTROL RECEIVER BOARD page 18
7. CONTROL LEDS page 19
8. OPERATION OF DISPLAY page 19
9. ADJUSTING THE OPERATING PARAMETERS page 19
10. PROGRAMMING page 21
11. OPERATION OF ELECTRONIC CLUTCH page 21
12. PROTECTION FUSES page 21
13. FUNCTION LOGICS page 22
14. HOW TO SECURE THE BOARD page 24