16 |
P a g e
Configure Intercom Before Install
Step 1
Step 2 -
Download and install the app on the end-
user’s phone.
Step 3
–
Connect 24v DC power with the power supply provided into the surge board
and then use flex cable from the 24v out to the power terminal of the IP PCB.
Once the 4G Router has been fully configured and you have an internet connection
you can proceed to attach the intercom to the app and perform initial testing.
Note: If you skip this step and proceed directly to installation, technical support may
request you go back and perform this step before diagnosing further.
Search for
Praetorian Guard
and find the icon, or
scan the QR code if the phone has a QR scan app.
Note:
Be sure to accept ALL permissions during
install, otherwise you will experience problems later!
Please ensure you check the app
for updates at least once a month.
Tip:
Slight differences will be seen
between the Android and iOS app
versions; any major differences will be
highlighted in the screenshots below.
Relay
2
Relay
1
8G
B
SD
CA
RD
Serial
Number
24V 0V
N/ O C1 N/C
N/ O C2 N/C
B
+M
S
Reset
EG GND
LAN
Relay
2
Relay
1
8GB
SD
CA
RD
Serial
Number
24V 0V
N/ O C1 N/C
N/ O C2 N/C
B
+M
S
RESET
EG GN D
Ethernet
Socket
(RJ45)
24V DC
Содержание 4401
Страница 3: ...3 P a g e PHASE 1 Site Survey...
Страница 5: ...5 P a g e PHASE 2 Product Overview...
Страница 14: ...14 P a g e PHASE 3 Setup To be done before installing the intercom...
Страница 17: ...17 P a g e PHASE 3 Setup Continued...