Page 2
November, 2003
422 User Manual
The owner and/or operator of this system must read
and understand this manual and the safety instructions
supplied with other components of the gate system.
This information should be retained by the owner/
operator of the gate.
WARNING!
To reduce the risk of injury or death
1 . RE AD AND FOLLOW ALL
INSTRU C TIONS.
2. Never let children operate or play with gate
controls. Keep the remote control away from
children.
3. Always keep people and objects away from
the gate. NO ONE SHOULD CROSS THE PATH
OF THE MOVING GATE.
4. Test the gate operator monthly. The gate
MUST reverse on contact with a rigid object
or stop when an object activates the non-
contact sensors. After adjusting the force or
the limit of travel, retest the gate operator.
Failure to adjust and retest the gate operator
properly can increase the risk of injury or
death.
5. Use the emergency release only when the
gate is not moving.
6. KEEP GATES PROPERLY MAINTAINED. Read
the owner’s manual. Have a qualified service
person make repairs to gate hardware.
7. The entrance is for vehicles only. Pedestrians
must use separate entrance.
8. SAVE THESE INSTRUCTIONS.
9. The installer must provide a main power
switch that meets all applicable safety
regulations.
10. Clearly indicate on the gate with a minimum
of 2 warning signs (visible from either side of
the gate) that indicates the following.
•
The gate is automatic and could move at
any time, posing a serious risk of
entrapment.
•
Children should not be allowed to
operate the gate or play in the gate area.
•
The gate should be operated only when
it is visible to the operator and when the
area is free of people and obstruction.
11. Devices such as reversing edge and
photocells must be installed to provide
better protection for personnel property and
pedestrians.
U
SE
1. Use this equipment only in the capacity for which it
was designed. Any use other than that stated should
be considered improper and therefore dangerous.
2. When using any electrical equipment, observe some
fundamental rules:
•
Do not touch the equipment with damp or
humid hands or feet.
•
Do not install or operate the equipment with
bare feet.
•
Do not allow small children or incapable
persons to use the equipment.
3. If a gate system component malfunctions, turn off the
main power before making any attempt to repair it.
4. Do not attempt to impede the movement of the gate.
You may injure yourself as a result.
5. This equipment may reach high temperatures during
operation; therefore, use caution when touching the
external housing of the operator.
6. Learn to use the manual release mechanism according
to the procedures found in this installation manual.
7. Before carrying out any cleaning or maintenance
operations, disconnect the equipment from the
electrical supply.
8. To guarantee the efficiency of this equipment, the
manufacturer recommends that qualified personnel
periodically check and maintain the equipment.
O
PERATOR
L
ABEL
The labels on your 422 Operator lists the following
information:
•
Model Number
•
Serial Number
•
Voltage Rating
•
Amp Draw
•
Pump Size
•
Motor RPM
•
Recommended Oil
•
UL Specifications
N
OTE
: Removing or defacing (i.e. painting over) the
labels will void the warranty. The UL labels must be
visible for inspection.
I
MPORTANT
S
AFETY
I
NFORMATION
