F5 WANJet 500, Руководство по платформе

Страница: 60 / 77

Appendix A
A - 4
Attaching the outer rails
After you have installed the inner rails and stops to the unit, you can attach
the two outer rails to the rack.
Each outer rail fits into the bracket attached to each post. Use the pan head
screws and flanged nuts to attach the outer rail to the mounting brackets.
To attach the outer rails to the rack
1. On one side of the unit, place the rail into the rail mount, and ensure
that the rail slide is not extended.
2. Attach the rail to the front of the mount, as shown in Figure A.4.
3. Extend the rail to reveal additional screw holes.
4. Attach the rail to the mount as shown in Figure A.5.
5. Repeat this procedure for the rail on the other side.
Figure A.4 Attaching the outer rail to front of the mounting bracket