F5 WANJet 500, Руководство по платформе

Страница: 58 / 77

Appendix A
A - 2
Figure A.1 shows the mounting screws that are included with the kit
hardware.
Figure A.1 The three types of mounting screws included with the WANJet
appliance: (1) pan head Phillips, (2) pan head Phillips/straight slot hybrid,
(3) pan head Phillips and flanged nut.
Attaching the inner rails and stops
To install the optional rail-mount kit, you must first attach an inner rail and a
stop to each side of the unit. Figure A.2 shows the unit with an inner rail
attached to one side.
Figure A.2 An inner rail attached to the WANJet 500
To attach the inner rails and stops to the unit
1. Prior to attaching the inner rail, separate the rail slides.
The inner rail shown in Figure A.2 slides into the outer rail that
attaches to the rack using the rail-mount brackets.
2. Attach an inner rail to each side of the unit, as shown in Figure A.2,
using the pan head Phillips screws included with the system.
Note that each side requires four screws.