F5 WANJet 500, Руководство по платформе

Страница: 44 / 77

Chapter 4
4 - 2
Figure 4.1 Power supply partially removed from the system
Figure 4.1 shows a picture of the unit with the power supply partially
removed from the WANJet 500 platform.
Replacing a hard drive
The WANJet 500 platform includes one hot swappable hard drive and has a
slot for an optional second hot swappable hard drive. You can change or
replace a hard drive tray as part of the routine maintenance of the unit, or in
the event of a drive failure.
Removing and replacing a hard drive tray
You do not need special tools to replace a hard drive tray.
To remove a hard drive
1. Each hard drive tray is secured by a simple switch. To unlock the
switch, turn the switch counterclockwise from Lock to Open.
2. Push the Lock/Open switch slightly to the left to release the tray
lever.
The tray lever extends from the drive tray.
3. Grip the tray lever and pull the drive tray out of the system.