manualshive.com logo in svg

F5 i2000 Series, Руководство по платформе

Поделиться
Скачать
F5 i2000 Series Скачать руководство пользователя страница 25

Platform Installation

About installing the i2000/i4000 Series platform

After you have reviewed the hardware requirements and become familiar with the i2000/i4000 Series
platform, you can install the unit into a 19-inch rack.

Important: Before you install this platform, review the environmental guidelines to make sure that you
are installing the platform into a compatible rack and in the appropriate environment.

Note: F5

®

 recommends that you keep all original packaging, in case you need to repackage and ship the

platform later.

About the quick-install rails

The quick-install rails are optimized for installation into square hole cabinets, but can be installed in other
cabinet styles, such as round hole cabinets, using the screws provided. The rails are easily converted to
mount to either cabinet style.

Figure 5: Quick-install rails

For information about installing the platform using the quick-install rails, see the instruction guide
provided by the manufacturer, which is included with the rail hardware.

Caution: Be sure that the rotating mount brackets located on the ends of the rails are locked into place
on both sides of the platform when installing the quick-install rails.

After installing the platform, secure the chassis to the rack with the rail lock brackets that are provided.

Quick-install rail kit hardware

When you are installing with the quick-install rail kit, use these components.

Quantity

Hardware

2

Quick-install rails

2

#8-32 pan head screws, steel zinc

8

#8-32 thumb screws (from rail kit)

Содержание i2000 Series































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды