F5 8900, Руководство по платформе

Страница: 40 / 64

Recovery Procedure BIG-IP Version
using RAID (redundant array of independent disks)
by default. For more information, see
About hard
disk drive replacement on a 10.1 and later system .
If your system is running version 10.0.0, and your
primary hard disk drive (the disk located in the 10.0.0
right-hand bay) fails, you have two options. For more
information, see
About hard disk drive replacement
on a 10.0 or 9.x system .
If your system is running version 9.x, and your
primary hard disk drive (the disk located in the 9.x
right-hand bay) fails, you have two options. For more
information, see
About hard disk drive replacement
on a 10.0 or 9.x system .
About hard disk drive replacement on a 10.1 and later system
If you are running a manufacturing installation of BIG-IP
®
software version 10.1 or later, your system
supports hard disk drive mirroring using RAID. You can install the replacement drive that you received
from F5 Networks into the system.
Figure 11: The front of a platform with front bezel removed and the orientation of the drive bays
1. Drive bay 1
2. Drive bay 2
Figure 12: An example of a hard disk drive shown partially removed from the system
40
Platform Maintenance