F5 8900, Руководство по платформе

Страница: 17 / 64

Viewing the status of all interfaces using tmsh
You can use
tmsh
to view the status of all interfaces on the platform.
1. Open the Traffic Management Shell (tmsh).
tmsh
2. Change to the network module.
net
The system prompt updates with the module name:
user@bigip01(Active)(/Common)(tmos.net)#
.
3. Display the current status of all interfaces.
show interface
The following is an example of the output you might see when you issue this command:
------------------------------------------------------------
Net::Interface
Name
Status Bits Bits Errs Errs Drops Drops Colli
In Out In Out In Out sions
------------------------------------------------------------
1.1
down 0 0 0 0 0 0 0
1.2 up 191.4K 0 0 0 374 0 0
1.3 down 0 0 0 0 0 0 0
1.4 up 22.5K 0 0 0 44 0 0
2.1 miss 0 0 0 0 0 0 0
2.2 miss 0 0 0 0 0 0 0
mgmt up 43.2G 160.0G 0 0 0 0 0
Viewing the status of all interfaces using the Configuration utility
You can use the Configuration utility to view the status of all interfaces on the platform.
1. On the Main tab, click
Network
>
Interfaces
.
This displays the list of available interfaces.
2. Click Statistics .
The Statistics screen for all interfaces opens.
About interface media type and duplex mode
All interfaces on the system default to auto-negotiate speed and duplex settings. We recommend that you
also configure any network equipment that you plan to use with the system to auto-negotiate speed and
duplex settings. If you connect the system to network devices with forced speed and duplex settings, you
must force the speed and duplex settings of the system to match the settings of the other network device.
Important: If the system is attempting to auto-negotiate interface settings with an interface that has the
speed and duplex settings forced (that is, auto-negotiation is disabled), you will experience severe
performance degradation. This applies to 10GbE and 40GbE interfaces.
17
Platform Guide: 8900