F2 362039 2007, Инструкция по эксплуатации

Страница: 20 / 46

22
Attaching the leash to the product
(Fig. K)
Attach the leash (12) to the back D-ring (1f), as
shown in figure K.
1. Pull the loop (12b) of the leash through the
D-ring.
2. Pull the ankle attachment (12a) through the
loop of the leash until there is a knot on the
D-ring.
Using the leash (Fig. L)
WARNING!
• Never attach the leash (12) to your ankle
when you are using the product on flowing
bodies of water (e.g. bodies of water with
rapids and rivers).
• Never attach the leash to your ankle in off-
shore winds.
• When using the product in deep water, attach
the leash to your ankle as shown in figure L.
Using the dry sack
A splash-proof dry sack (14) is also included
with the product. Smaller objects can be kept in
the dry sack.
Note:
the dry sack is not waterproof. Do not
store any sensitive items, such as cameras, in the
dry sack.
Transporting the product in the
backpack
You can store or transport the product in the
backpack (15) (Fig. I). Disassemble the product
in the reverse order to that shown in the "Assem-
bly" section. Ensure that the product is complete-
ly clean and dry.
1. Lay the board (1) on a clean, even, dry
surface.
2. Roll up the board and fasten it with the belt
(11).
3. Place the board, together with all other prod-
ucts, into the backpack.
Care, storage, repairs and
maintenance
Care
WARNING!
Do not use harsh cleaning agents, brushes with
metal or nylon bristles, or any sharp or metallic
objects such as knives, or similar. Only use mild
cleaning agents.
Clean the board only when the valve is closed,
and after every use.
1. Remove the US fin (6) from the board (1).
2. Place the board on a clean, even and dry
surface.
3. Clean the board and fins with fresh water and
mild soap in order to remove any salt crystals,
grains of sand and any other minor contami-
nation.
4. Wipe everything down with a soft, dry cloth.
5. Let the board and fins dry completely after-
wards.
Storage
WARNING!
Mould may form if the product is not stored
properly.
• Store the product in a clean, dry, well-ven-
tilated location away from direct sunlight,
where it is not exposed to major temperature
fluctuations.
• When not in use for an extended period, we
recommend that you disassemble the product
completely and store it in the backpack
provided.
• Store the product in a safe place, out of reach
of children.
• Do not place heavy or sharp objects on the
product.
• After an extended storage period, check the
product for wear and tear, or signs of ageing.
GB