TRT800A / P/N 800ATC-A-(2xx)-(3xx)
Operation and Installation
15
Document-No: 03.2114.010.71e / Revision: 2.00
•
Display Standby Squawk:
Press
or
or use the rotary knob
(the VFR-Squawk
remains active!)
Example:
•
Now the Standby Squawk can be adjusted by using the rotary knob
and activated with
.
•
In order to store the current active Squawk as new VFR-Squawk
(replacing the factory setting 7000):
Press and hold
until an „S“ is indicated (approx. 3 s); after
releasing the button „VFR“ is shown
2.9
ID – Special Position Identification (SPI): “Squawk
Ident”
Press ID to activate transmission of the special position identification
pulse with every reply within 18 seconds; “IDT” appears on the display
By pressing
a special position identification pulse (SPI) is transmitted
with every reply within 18 seconds, which causes an accented marking
on the Controller’s screen. The „Special Position Identification“ has to be
activated after the „Squawk Ident“ request of the Controller.
2.10
Error-Codes
Please refer to 2.3 Display Indications for possible displayed errors.
7000
FL 030
STBY 4700
7000
FL 030
STBY VFR
4700
FL 030
STBY 5600
