F-SECURE POLICY MANAGER 9.0, Руководство администратора

Страница: 53 / 102

Alerts
This section describes how to view alerts and reports, and how to configure alert forwarding.
Viewing alerts and reports
The hosts can send alerts and reports if there has been a problem with a program or an operation.
When an alert is received, the button will light up. To view the alerts:
1.
Click .
The Alerts tab will open. All alerts received will be displayed in the following format:
Click the Ack button to acknowledge an alert. If all the alerts are acknowledged, the
Ack button will be dimmed.
Ack
The problem’s severity. Each severity level has its own icon: Severity
Normal operating information
from a host. Info
A warning from the host. Warning
Recoverable error on the host. Error
Unrecoverable error on the
host. Fatal error
Security hazard on the host. Security alert
Date and time of the alert. Date/Time
Description of the problem. Description
Name of the host/user. Host/User
The F-Secure product that sent the alert. Product
When an alert is selected from the list, more specific information about the alert will be displayed. F-Secure
anti-virus scanning alerts may have an attached report, which will also be displayed.
2. To view reports, click on the Reports tab, or select Product view
➤
Messages from the menu.
The Reports tab has the same structure as the Alerts tab. Alerts tables and Reports tables can be sorted
by clicking on the column heading.
Configuring alert forwarding
You can configure alerts by editing the Alert forwarding table, which is located under F-Secure Management
Agent
➤
Settings
➤
Alerting
➤
Alert Forwarding .
The same table can also be found in the Management Agent product view in the Alert Forwarding tab.
To configure alert forwarding:
1. Select F-Secure Management Agent
➤
Settings
➤
Alerting
➤
Alert Forwarding from the menu.
2. Specify where alerts are sent according to severity level.
The target can be Policy Manager Console, the local user interface, an alert agent (such as the Event
viewer , a log file, or SMTP), or a management extension.
The Alert forwarding table has its own set of default values.
F-Secure Policy Manager | Using Policy Manager Console | 53