| English
8
ENGLISH
GENERAL SAFETY WARNINGS
Read and understand this owner’s manual before
operating this product. You can help prevent ac
-
cidents by being familiar with your product’s con
-
trols and by observing safe operating procedures
and safety signs. Always use your common sense
to avoid all situations considered beyond your ca-
pability. Do not use while you are tired or under
the influence of drugs, alcohol or any other medi
-
cation. Keep bystanders and animals that could be
hurt, as well as items that could be damaged away,
while operating. Never allow children or people
unfamiliar with these instructions to use the prod
-
uct. Local laws may restrict the minimum age of
the operator. Bear in mind that the operator or
user is responsible for accidents or unexpected
events occurring to other people, animals or their
property. Do not expose the product to excessive
moisture, dust, dirt or corrosive vapors. Do not
mount equipment or accessories on the machine
not foreseen or approved by the manufacturer.
Never attempt to modify the product. Non-au
-
thorized modifications or accessories can result
in serious personal injury or the death of the op
-
erator or others. Consult your authorized dealer
for disassembly and service, not covered in this
manual. If something breaks or an accident occurs
while working, turn off the machine immediately
and move it away to prevent further damage. In
case foreign body has entered the machine, stop it
immediately, inspect it for any damage and make
repairs before starting it again.
PROTECTIVE EQUIPMENT
Make sure that you use appropriate and certified
protective equipment when operating the unit.
Always wear clothing which does not hamper
movements, protective gloves, goggles, half-
mask respirator, ear protection and anti-shear
safety boots with non–slip soles. Never wear
scarves, necklaces or any hanging or flapping ac
-
cessory and clothing that could catch in the ma
-
chine. Tie up your hair if it is long.
FIRE AND BURN HAZARDS
Some parts of the machine get hot enough to
ignite flammable materials. Electric equipment
malfunctions can cause sparks which could ignite
flammable material.
Make sure that you keep your work area clean and
tidy and do not use the machine near flammable
material. If a fire occurs, use an appropriate fire
extinguisher.
Some parts of the machine get hot enough to
cause burn damage. Pay attention not to touch
them in order to avoid getting burned. Let the ma
-
chine cool before storing it.
CATEGORY SAFETY WARNINGS
SAFE OPERATION
All of the operational levers of the machine must
move from one position to the other easily and
must not need forcing. The electric cables and in
particular the main plug cable must be in perfect
condition to avoid the generation of any sparks or
the risk of electric shock. The handgrips and pro
-
tection devices must be clean and dry as well as se
-
curely fastened to the machine. Make sure that you
always use the correct tool for each job in order to
avoid machine failure or injury and avoid overload
-
ing the machine. The voltage and frequency ratings
of the electricity supply must be within the specifi
-
cations of the machine. Make sure that the machine
switch is off when plugging it in, in order to avoid
risk due to unintentional starting. Remove any keys
and wrenches from the machine before operating.
Make sure that you stop the machine and unplug it
from mains:
f
When mounting or removing accessories and
tools.
f
Whenever you leave the machine unattended.
f
During cleaning or maintenance.
f
During machine repositioning, transportation
or storage. In case of a malfunction or jam of the
machine, switch the machine off immediately and
remove it from power source. The machine should
not be started again if the jam is not cleared or the
malfunction amended, at an authorized service
center when needed. The machine could poten
-
tially jam when:
f
The machine is overloaded.
f
The work piece to be machined is jammed.
ELECTRICITY HAZARDS
Make sure that the electric cables of the machine
and the mains plug, that it is connected to, are in
good condition and not worn. Never use a damaged
machine or a machine with damaged or worn elec
-
tric cables and plugs. Do not expose the machine
and the electric cables to wet conditions and never
touch when wet. Use a socket outlet with ground
contact. Do not come in contact with grounded sur
-
faces or electric cables, to avoid the risk of electric
shock. Do not use the cable to pull the plug out of
the socket. Always lead the power cable away from
the rear of the machine and protect it from heat,
oil and sharp objects. When the machine is to be
used outdoors, use only extension cords intended
for outdoor use. The cross section of any extension
cable must measure at least 1,5mm
2
and the mains
connection must be protected by an appropriate
fuse.
MOVING PARTS HAZARDS
Moving parts can cause serious injury. Avoid con
-
tacting such parts when they are still in motion
and make sure that you keep anything that could
be trapped in the operating machine, such as loose
hair and clothing, away. Do not touch the moving
parts before they come in complete stop. Keep your
hands away from the operating area of the machine
and use only the specified handles on the machine.
Содержание AC-B 100/3MC HD
