Choosing an Oven
Function
Convection Steam Oven
User Manual
24
DIY Recipe Modes
You can create and save up to 10 of your most-used recipes for later use. You can save
the temperature and time for your recipe and set anywhere from one to three cooking
stages. You can adjust the function, temperature, and time setting for each stage of
cooking.
1.
Fill the water tank with cold, filtered tap water to the MAX mark and install (not necessary
for Grill or Convection modes.)
2. Place food on grill rack, steam tray, or baking tray then place in oven.
3. From the home screen, enter the
DIY Recipe Mode
screen, navigate to your
desired
oven function
, and press .
4. The display will show the default temp and time for that mode. Use the arrows to
navigate and adjust settings as needed.
5. Optional: To add a second cooking stage, press the
Settings
button after adjusting the
temp and time settings but before pressing . You can set a new oven function for the
second stage, and adjust the time and temp.
6. Optional: To add a third cooking stage, press the
Settings
button after adjusting the temp
and time settings but before pressing . You can set a new oven function for the third
stage, and adjust the time and tem.
7. If you want to start cooking immediately, press after adjusting the temperature and
time settings to begin thoven function.
8. Once cooking is complete the
Memory
icon will appear on the LCD panel to allow you
to save these
settings
to 1 of 10 DIY Setting slots. Press the Settings button while the
Memory
icon is displayed to save this to the next open DIY recipe slot.
