45
11
DECLARATION OF CONFORMITY
(in compliance with directive 2006-42-CE - annex II, point B)
F.B s.r.l.
Via Valchiampo, 68
36050 MONTORSO VICENTINO (VI) - ITALY
hereby declares that all the submersible electropumps 6”, 8”, 10” and 12” for wells belonging to the series:
-
FB6R; FB6S
6 inches submersible electropumps for wells
-
FB8R; FB8S
8 inches submersible electropumps for wells
-
FB10R; FB10S
10 inches submersible electropumps for wells
-
FB12R; FB12S
12 inches submersible electropumps for wells
And in particular the submersible electropumps of type ……………………- serial n° …………………………….
are constructed in compliance with the directives:
-
2006-42-CE
Machinery
-
2006/35/UE
Low tension devices
-
2004/30/UE
Electromagnetic compatibility
-
2009-125-CE
Environmentally friendly project
and harmonised rules:
-
UNI EN ISO 12100-1:2010
Safety of machinery, terminology
-
UNI EN ISO 12100-1:2010
Safety of Machinery, technical principles
-
CEI EN 60034-1:2010
Nominal functioning characteristics
-
CEI EN 60034-2:2014
Methods for determining losses and performance
-
CEI EN 60034-5:2006
Classification of degrees of protection
-
CEI EN 60034-12:2006
Start-up characteristics
-
CEI EN 60034-14:2006
Mechanical vibrations
-
UNI EN 809:2009
Pumps and groups of pumps for liquids – General safety qualifications
-
UNI EN ISO 9906:2002
Rotating pumps – Hydraulic performances’ proofs and acceptance criterion
REGULATION (EU) N. 547/2012 of 25/06/2012 implementing Directive 2009/125/CE
We, F.B. srl, declare under our sole responsibility that the following directive integrates EC Declaration of Conformity
contented in this handbook.
Minimum Efficiency Index: MEI
≥
0,10
The benchmark for most efficient water pumps is MEI
≥
0,70
The efficiency of a pump with trimmed impeller is usually lower than that of a pump with the full impeller diameter. The
trimming of the impeller will adapt the pump to a fixed duty point, leading to reduced energy consumption. The minimum
efficiency index (MEI) is based on the full impeller diameter.
The operation of this water pump with variable duty points may be more efficient and economic when controlled, for
example, by the use of a variable speed drive that matches the pump duty to the system.
Faccio Domenico
Montorso Vicentino,____________
