16
1. Lauch your EZVIZ app within bluetooth range and make sure your phone is bluetooth connected to the lock.
2. Tap your lock and choose Setting -> Bluetooth Connection Mode and set the mood you need.
Install Batteries
Install batteries: press the button on the bottom and remove the front cover, drag the belt and the batteries will pop
out.Install 4*AA-sized batteries into the slot, and then press battery cover.
•
Install correct batteries in case of explosion.
• When not using batteries for a long time, remove them from battery slot.
•
Do not use new batteries with old ones at the same time.
•
Do not place batteries with the (+) and (-) in the wrong way around.
• Dispose used batteries according to the local environmental protection law.
Restore to Factory Settings
Repower the lock, press and hold the Matching Key for 5s until the LED indicator ring is solid orange, all parameters
will be restored to default settings.
Alarms
1. Tamper Alarm
Once being dismantled by force, the lock will send out alarm lasting about one minute.
2. System Locked Alarm
Verify with wrong password or card 5 times in 5 minutes, the system will be locked for 3 minutes.
3. Low Voltage Alarm
Once battery voltage is low, the voice prompt will remind you to replace batteries.
Maintenance
1� Daily Maintenance
• Do not let lock contact with corrosive materials to avoid lock damage and impacting its gloss.
• Replace batteries immediately once battery voltage is low to ensure the normal use of the lock. Pay attention to
the positive and negative poles of batteries when replacing them.
• Ask professionals to check the lock if it is not flexible or cannot be held in correct position.
• Keep lubricant in the rotating part of the lock to keep it rotate smoothly and prolong its service life.
• It is recommended to check the lock once every six months or one year, and check whether the key is loose.
•
Apply a small amount of graphite powder or pencil powder into lock cylinder slot to ensure the key is inserted
and removed smoothly on regular basis (one year or six months). However, do not apply any grease to lubricate
in case of grease sticking to the pin tumbler spring.
2� FAQ
