2
Base Station
Loudspeaker
Power Button
Ethernet Port/
Network Indicator
Power Port
Reset Button
LED Indicator
Micro SD Card Slot
SYNC Button
Name
Description
LED Indicator
•
Solid Green: The base station works properly.
•
Solid Blue: The base station is not connected to the Internet.
•
Flashing Blue: The base station is pairing with the camera.
•
Solid White: Restore factory settings successfully.
•
Flashing Red: An alarm occurs.
•
Solid Red: SD card error.
SYNC Button
•
Short press to turn off the siren when an alarm occurs.
• Hold for 2 seconds to start pairing with the camera (Pairing can last up
to 2 minutes).
Power Button
Press to connect or cut off power.
Network Indicator
Solid Green: The Ethernet cable is connected.
Reset Button
Hold for 5 seconds to restart and reset all parameters to default.
Setup
Step 1: Charge the Camera (Optional)
Connect the camera to power outlet with the power adapter (5V 2A).
If the camera is powered off, short press the SYNC buttob to power on.
Power Outlet
Power Adapter
•
Please do not charge the camera when the temperature exceeds 45 degrees or below 0
degrees.
•
It is not allowed to charge the camera with power adapter outdoors.
Step 2: Power on the Base Station
Connect the base station to power outlet with the power adapter (12V 1A).
Power Outlet
Power Adapter
