5
Operating Instructions
Note: Remove plastic bags from filters before first use.
1. Plug the unit into a suitable electrical outlet.
2. Press the power button to turn the unit on.
3.
Change the timer, fan speed or UV settings if desired (refer to Control Panel description).
4. Press the power button to turn the unit off.
When the unit is not in use, switch it off and unplug it from the electrical outlet.
Cleaning and Maintenance
Cleaning the Unit
•
Always unplug the power supply before cleaning the unit.
•
Do not put the unit into water or use water to wash it directly.
• Do not use alcohol, oil, benzene, or any corrosive or flammable detergent to clean the unit.
•
Use a soft cloth with mild detergent to clean the unit, and make sure the unit is completely dry after cleaning.
• Regularly clean the inside and outer surface to prevent dust from gathering.
• To maintain or replace filters, see Filter Replacement instructions.
Storage Instructions
If the unit will not be in use for a long time, please pack and store it properly away from moisture and direct sunlight:
•
Unplug the power supply of the unit.
• Clean the pre-filter.
•
Use a soft cloth to clean the air intake and air outlet.
Caution
Proper use and regular maintenance can ensure efficient operation and extend the life of the unit. Do not attempt
to repair or adjust any electrical or mechanical functions on this unit. All servicing should be performed by qualified
personnel only.
Filter Replacement
Filter Replacement Indicator
After 2,000 hours of use, the “Filter Reset” button light will flash during operation. This indicates that the filters in
the air purifier need to be replaced.
Replace the filters according to the instructions below. Then, press the Filter Reset button to reset the built-in filter
replacement timer.
Filter Replacement Instructions
The air purifier comes with the filters fitted inside, but you will need to remove the plastic packaging from the filters
before using the air purifier for the first time.
When replacing with new filters, remove all packaging and place filters into the unit as described below.
• Place the unit against a wall for more stability when you remove or insert filters.
• Make sure you insert the filters in the correct order and position.