15
www.CurrieTech.com
Currie Technologies
®
bATTERY PACk, CHARGER PORT AND CHARGER
ELECTRO-DRIvE™ SMART CHARGER:
The Electro-Drive™ scooter comes
with its own Electro-Drive™ Smart Charger that connects with an easy-
access charger port for recharging the batteries. This charger unit has lights
that show the battery charge status. Refer to the instructions that appear on
the charger unit and its instructions.
Use only a Currie Authorized Smart Charger to charge
the batteries. Using any other charger may damage the
batteries and void your warranty.
HOW TO CHARGE THE bATTERIES
1.
IMPORTANT
: Be sure the
power switch on the scooter
is in the “OFF” position. (Ref
Photo A)
Rotate open the charger port
2.
cover (Ref Photo B).
Insert the Battery Charger’s
3.
XLR (Male) plug into the Char-
ger Port (Ref Photo C).
Plug the Battery Charger’s AC
4.
plug into a standard, grounded
110V AC outlet.
Let the batteries charge until
5.
the charger lights indicate that
the batteries are fully charged,
then unplug the charger from
the scooter and the AC outlet.
Batteries like to have a full charge, so
always be sure to recharge them fully
after each ride. If you leave them in
a run-down condition, without quickly
recharging them, it will shorten their
life expectancy. The charger may get
warm to the touch, so make sure you
charge them in an open area and
do not lay anything on the charger
unit while charging. Although you
cannot over-charge the batteries
Photo A
WARNING
!
Photo C
Photo B