13
www.CurrieTech.com
Currie Technologies
®
Align the handlebars to the
8.
front wheel. The handlebars
must be perpendicular to the
front wheel.
9.
Repeat steps 2 and 3
to once
again access the steerer bolt
(6mm Allen Bolt or 13mm
Hex Bolt).
Fully
tighten the
steerer bolt.
The stem is held
in position with the expander
bolt and wedge.
10.
Repeat steps 5 and 6
to once
again secure the folding
stem. Be sure the QR
retention pin (silver) is fully
engaged with the upper
plate.
If you are unable to lock the
WARNING
!
handlebar folding hinge properly, or its Quick- Release
lever, or properly secure the two main handlebar parts
to the scooter, DO NOT RIDE THE SCOOTER. Contact
Currie Technologies
®
Customer Service at 1-800-377-
4532 for further instructions. Failure to do so may result
in serious injury or death to the rider or severe damage
to the scooter.
