30
Customer Service 1-800-377-4532
Currie Technologies
®
WARNING
!
fRONT AND REAR WHEEL
500DD, 750DD AND 1000DD SERIES
SCOOTERS
Do not use a flat
screwdriver or
other sharp metal tool to remove the
tire from the rim as this may cause
damage to the rim, inner tube and/or
tire.
To remove the front wheel refer
1.
to page 23 then proceed to step
3.
To remove the rear wheel refer
2.
to pages 24 then proceed to
step 3.
With a bicycle tire lever unseat
3.
one side of the tire from the rim.
(Ref Photo A, B, C)
Remove the tube from the tire.
4.
Slightly inflate the tube in
5.
order to inspect for leaks or
punctures. Patch or replace the
tube as necessary.
Carefully check the inside of
6.
the tire and remove any sharp
objects or debris that caused
the puncture. If the tire is cut
through in any place replace it
To reassemble the front wheel,
7.
first slightly inflate the tube to allow it to take shape then install into
the tire.
Insert the valve thru the hole in the rim.
8.
Push (by hand only) one side of the tire and tube all the way over and
9.
onto the rim.
With a bicycle tire lever seat the other side of the tire onto the rim. Be
10.
sure not the pinch (tube puncture caused by being caught between the
tire and rim) the tube.
Inflate the tire slowly to the recommended tire pressure. Inspect the
11.
tire during inflation to ensure it is seating onto the rim properly.
Photo A
Photo C
Photo B
