EZiclean power animal 2.0, Руководство пользователя

Страница: 12 / 16

Cleaning and maintenance
Assembly
1. Except main unit, other parts can be washed with warm soapy water. After cleaning, it must be thoroughly
dried before being put back into use. Never immerse the main unit in water or any liquid.
2. Only use a soft, slightly damp cloth to clean the housing of the vacuum cleaner. Do not allow any liquid
substances to enter the vacuum cleaner.
3. Do not use any corrosive chemicals or abrasives.
4. Do not use when the filter is damaged or worn.
5. This product does not contain usable parts, please do not disassemble or repair it by yourself.
For best use, empty the dust cup and clean the filter every time when used it.
1. Press and hold the dust cup lock to separate the dust cup part and the host part.
2. Press and hold the dust cup release button to dump the dust in the dust cup.
3. Separate the upper part of the dust cup and the dust cup. Take out the filter and the air inlet filter and
wash them in warm water. Please dry it in the air for 24 hours before refilling it in the dust cup. Important:
The filter cannot be cleaned with cleaning equipment. Do not dry the vacuum cleaner with drying
equipment. Only dry naturally.
Charging
Please turn off the power first, then insert the charger into the charging hole, and finally plug the charger
into the plug board. Make sure your hands are dry.
the percentage of the battery is displayed. When 100%, the device is fully charged.
Unplug the charger, press the switch, and the vacuum cleaner starts working again.
Warning:
Charge only with the original charger to avoid damage to the vacuum cleaner.
1 2
It is recommended to replace the filter every three months (depending on the usage) to
ensure the best performance.
EN