EZG Mud Hog MH20, Руководство пользователя

Страница: 7 / 23

7
Revision Number-011 02-23-2017 - Present
EZG Manufacturing 1-800-417-9272 www.ezgmfg.com
1. Slide forks under the Mud Hog® and place in desired location.
2. Fully extend outriggers, set and level Mud Hog® securely on ground.
See Setup Instructions for proper procedure
OPERATING INSTRUCTIONS
WARNING
This equipment is to be operated by trained and qualified personnel over
the age of 18. Death or serious injury can result.
3. Remove pins and adjust legs to desired height and reinsert pins.
See Setup Instructions for proper procedure
WARNING
Outriggers MUST be in the fully extended position before operating.
WARNING
NEVER put your hands inside mixer drum while equipment is running.
Death or serious injury can result.
4. Start engine.
See engine manuals for proper procedure.
5. Fill with material, add water, and mix to desired consistency and dump.
NOTE: In the unlikely event that the mixing paddles plug, momentarily reverse the paddles.
OBTAINING SPARE PARTS
Spare parts for your Mud Hog® may be obtained by the following procedure:
1. Record the information from the serial number tag located on the frame near the hydraulic reservoir.
2. Using the parts reference table in this manual, record the part number or component.
3. Contact your local Mud Hog® dealer or EZG Manufacturing at 1-800-417-9272 with the information
recorded.