Installing and Adjusting Seat
The proper seat height is achieved when your child can put both feet on the ground at the same time when
seated. If the seat is too high or too low, use the quick-release to loosen the seat clamp bolt, adjust the seat to the
proper height, and retighten quick release. There is a line on the seat tube describing its highest setting. Do not
exceed this limit, it is dangerous and can permanently damage your bike.
Insert seat post into seat tube opening and align your seat with the frame. Once the seat is positioned to the
proper height and direction, tighten the silver quick-release until the seat won’t rotate or slide up and down.
Installing Front Wheel
With the bike upside-down on its seat and handlebars, remove the nuts and washers from both sides of the axle.
Check to make sure that the front wheel is being installed in the same direction as the rear wheel. Remove fork
protector.