EZ Digital DM-330SRS, Руководство по эксплуатации

Страница: 6 / 35

INTRODUCTION
NOTE
All material in this manual applies to the DM-330SRS
unless otherwise indicated.
This meter has been designed and tested according to
EN 61010-1, Safety Requirements for Electronic
Measuring Apparaturs.
This manual contains information and warnings which
must be followed to ensure safe operation and retain the
meter in safe operation and retain the meter in safe
condition.
HOLSTER (Option)
The meter comes with a snap-on holster that absorbs
shocks and protects the meter from rough handling.
You can also hang the meter on your belt for easy viewing
while probing.
The test leads may be snapped into the holster that allows
you to hold both the meter and probe tip with one hand.
WARNING
READ "MELTIMETER SAFETY" BEFORE USING THE
METER.
Your EAD Digital Multimeter (also referred to as the meter )
is a handheld instrument that is designed for use in the field,
laboratory and at home.
The meter combines the precision of a digital meter with the
speed and versatility of a high resolution.
The meter is powered by a 1.5Vx2 battery and has a rugged
case sealed against dirt, dust and moisture.
A snap-on holster protects the meter from rough handling.
After unpacking the meter, if you notice that the meter is
damaged or something is missing, contact the place of
purchase immediately. Save the shipping container and
packing material in case you have to reship the meter.
The higher input voltage than the maximum one can cause
the roaring noise by the spark gap included for protection.
1
INTRODUCTION