EZ Digital DM-330SRS Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 35

EZ Digital DM-330SRS Скачать руководство пользователя страница 14

Digital and Analog display

1) DIGITAL DISPLAY
Digital reading are displayed on a 4000 count or 3200
count display with polarity indication and automatic point
placement. When the meter is turned on, all display
segments and annunciators appear briefly during a
selftest.

2) ANALOG DISPLAY
The analog display provides an analog representation of
readings and updates 20 times per seconds but it doesn't
operate at the capacitance function and the frequency
count mode.

3) AUTO AUTO-RANGE (DM-333, 334)
The meter is the auto-range mode and will automatically
select range with the best resolution.
The meter powers on in auto-range mode.

4) NEGATIVE POLARITY
Automatically indicates negative inputs.
When REL is enabled, indicates negative requests of math
calculations.

5) BEEPER
continuity test is enabled.

6) REL RELATIVE MODE(DM-331)
The value displayed is the difference between the present
measurement and the previously stored reading.
Probe resistance compensation for resistance
measurements can be achieved by using this mode.

7) MIN/MAX MODE
MIN/MAX value in MIN/MAX recording mode.
The value displayed is the maximum or minimum reading
taken since the minimum and maximum recording mode
was entered.

9

HOW TO USE THE METER

DIGITAL AND ANALOG DISPLAY

«
...
12
13
14
15
16
...
»

Содержание DM-330SRS




































Отзывы:

Нет отзывов