EZ-ACCESS PATHWAY 3G, Инструкция по эксплуатации

Страница: 3 / 11

Page | 3
1.
GETTING STARTED
1.1 Read this instruction manual in its entirety before use and follow all instructions before and during use.
1.2 Before use with mobility equipment, refer to your mobility equipment's owner guide for acceptable
ramp usage, including proper slope/incline, chair direction, etc.; never exceed its recommendations.
1.3 Before each use, check the ramp for worn, loose, or damaged parts. If you find any of these conditions,
do not use the ramp.
1.4 Confirm that all package contents are present. Open the shipping box(es) and inspect for damaged or
missing parts. If damaged or missing parts are noted, do not use the ramp.
2.
PACKAGE CONTENTS
Contents may vary depending on options purchased.
QTY DESCRIPTION IMAGE (NOT SHOWN TO ACTUAL SIZE)
1
EZ-ACCESS® GATEWAY® 3G
SOLID SURFACE PORTABLE RAMP
2 CLEVIS PIN
4 CORNER PROTECTIVE CAP
2
HANDRAIL : TWO- LINE
(If two-line handrails were purchased)
2
HANDRAIL: VERTICAL PICKET S
(If vertical picket handrails were purchased)
4
HANDRAIL END BRACKET
(If handrails were purchased)
4
HEX BOLT
5/16” - 18 X 1 -1/2 ” Long
(If handrails were purchased)
12
FLAT WASHER
5/16” x 7/8” OD
(If handrails were purchased)
8
HEX NUT
5/16” - 18
(If handrails were purchased)
2
UPPER END LOOP
Shown with O-ring and Attachment Screw
(If handrails were purchased)