Page | 7
2.
GUARD RAMP ACTIVATING BAR
If you wish to install the Guard Ramp Activating Bar before lifting the VPL into place, go to step 2.1.
Otherwise, refer to the
PASSPORT® Vertical Platform Lift (VPL) Installation Manual
for Guard Ramp
Activating Bar installation information.
The Guard Ramp Activating Bar must always be installed on the same side as the guard ramp.
The correct Guard Ramp Activating Bar must be used with its intended platform for the guard ramp to
operate correctly. The 90° Turn Platform Guard Ramp Activating Bar extends further from the tower than
the Straight Platform Guard Ramp Activating Bar. The extension for the Straight Platform is approximately
7-7/8” and approximately 12-3/8” for the 90° Turn Platform.
2.1.
Attach the Guard Ramp Activating Bar in the three open holes, as shown in FIG. 2.1, on the corresponding side of
the tower using three 5/16”-18 x 1” Button Head Cap Screws (provided). Tighten Button Head Cap Screws
securely.
Do not attempt to lift or move the VPL using the Guard Ramp Activating Bar. Damage will result.
FIG. 2.1
Содержание PASSPORT PL120SP3651
Страница 6: ...Page 6 FIG 1 2 FIG 1 3...
Страница 9: ...Page 9 FIG 3 2 FIG 3 3 FIG 3 4...
Страница 20: ...Page 20 FIG 8 1 FIG 8 2...
