EZ-ACCESS PASSPORT PL120SP3651, Дополнение к руководству по установке

Страница: 4 / 22

Page | 4
VPL must be anchored to a concrete slab and braced to a proper structure before operating the VPL while it is
occupied.
Maintaining all labels and manuals in legible condition is required by the VPL owner and is essential for safe VPL
operation. The VPL comes with various product safety labels. Do not remove safety labels. If any labels are missing,
damaged or become illegible they must be replaced. An illegible label will fail to alert individuals on or around the
VPL of a procedure or hazardous operating conditions. Contact your dealer for additional information, replacement
labels and manuals or to schedule inspections, repairs or service.
When not servicing the VPL, keep all panels and protective coverings in place.
The VPL warranty is not transferable.
Using this VPL for anything other than its intended purpose will void the warranty.
Attempting to tamper with or modify any portion of the VPL will void your warranty.
Caustics, high alkaline detergents and solutions should not be used to clean aluminum.
REQUIRED TOOLS

3/8” or 1/2" Drive Ratchet

Standard Phillips Screwdriver

1/4” Open/Box End Wrench or Socket

Standard Flat Screwdriver

1/2” Open/Box End Wrench or Socket

Pencil or Similar Marker

7/16” Open/Box End Wrench or Socket

1/8” Allen Wrench

9/16” /Box End Wrench or Socket

7/32” Allen Wrench

Adjustable Crescent Wrench

3/16” Allen Wrench

13/64” or #7 Drill Bit

Hammer Drill w/ Bit for Concrete Anchor
TOOLS YOU MAY FIND USEFUL

Utility Knife

Needle Nose Pliers

Torpedo Level

Blade Style Fuse Puller

Tape Measure

Torque Wrench

Rubber Mallet

C-Clamps

Side Cutting Pliers

Vise Grip Pliers

Adjustable Crescent Wrench

Plumb Bob

Digital Multimeter (DVM)

Spare 5 Amp Blade Style Fuses

Plumb Bob

12” Long Piece of 12AWG Jumper Wire