EYEZONE B1080PW-2, Руководство пользователя

Страница: 5 / 21

6
7. SETTING UP
„
In the main menu, using the “ ▼ ” button on remote control to select the “
SETUP
” item, then
press the “ENTER” button. You will be presented with the B1080PW-2 settings screen.
„
You can also press the “
SETUP
” button on remote control to directly open the settings screen.
(If there is file that is being play, please stop first.)
„
There are four groups of sub-menu in the main menu (“Network Setup”, “FTP Setup”, “Video
Setup” and “Other Setup”).
„
In the settings screen, you can use the “ ▲
、
▼
、 ▲ 、 ▼
” buttons to select an item, and press the
“ENTER” button to confirm the selection.
„
Press the “SETUP” button on remote control to save and quit the settings screen.
7.1 NETWORK SETUP
„
Network with:
Select your network connection Disable/ RJ45/ Wi-Fi.
„
IP Assigned by DHCP:
If you have a DHCP-enabled router, please select “On”, then the router
will automatically assigns an IP address to the B1080PW-2. If you don’t have a DHCP –enabled
router, select “Off” and type the network information in “
Assign IP Address
”.
7
7.1 NETWORK SETUP (continued)
„
Assign IP Address:
If the B1080PW-2 is connected to a network without a DHCP server or you
want to use Local FTP Server function, enter the fixed IP address, Mask, Gateway and DNS for
the B1080PW-2.
PS. Refer to 5.1 for how to enter IP address by remote control.
NOTE:
Before setting the IP address, Mask, Gateway and DNS, check the network information of
your PC. Please follow the steps below to get the network information of your PC.
Step 1:
Click on “Start” → “Run” and type in “command”, then press “ENTER”.
The MS-DOS window will appear, type in “ipconfig” and then press “ENTER”
to get the network information.
Step 2:
Assign IP Address, Mask (Subnet Mask) and Gateway (Default Gateway)
for the B1080PW-2.
Enter the same values of the Subnet Mask and Gateway, and be careful not to enter
the values of IP address that are already used by other devices on the network.
„
Media Player 11 Server:
Enable/ disable the Media Player 11 server.
„
Wi-Fi SSID:
Select the SSID that is being used by your wireless network.
NOTE: If your router does not list its SSID, then it is a hidden network, and the B1080PW-2
cannot detect it. You must manually enter your wireless settings in “Wi-Fi Encryption Setup”.
„
Encryption Mode:
Disable/ enable the encryption function. The B1080PW-2 supports WEP
(Wired Equivalent Privacy) encryption technology used by wireless device.
„
Wi-Fi Encryption Setup
- SSID:
The SSID name selected in “
Wi-Fi SSID
” appears here. You can also enter SSID
name manually here.
-
Password:
To connect to an encrypted wireless device, the password you enter here must
match the password of the device exactly. (The B1080PW-2 can use
16bit Hex WEP protection)
NOTE: The SSID and password are case-sensitive.
„
Wi-Fi Connection Status:
Shows the Wi-Fi information (SSID Name/ Quality/ Channel/
Connection Speed).