ESP-LWQX-1000
26
ADJUSTING THE COLOURS WITH EC-LCONTROL
This section describes how to adjust colours using the “EC-Lcontrol” program.
A detailed description of the program can be found in
The EC-Lcontrol Software
section from page 56.
To start the program:
1.
Open the “EC_Lcontrol.ini” file.
2.
Set the setting “ESP_Mode=0” to “ESP_Mode=1”.
3.
Save and close the “EC_Lcontrol.ini” file
4.
Launch the EC-Lcontrol software (EC-Lcontrol.exe).
ª
The start window opens.
Fig. 14: The EC-Lcontrol main window
)
NOTE:
The EC-LControl software can be used for both ESP eyevis projectors and for the
eyevis Cubes series. Therefore, both the concepts of Projector and Cube are used.
(In the software and in the text)
EC_Lcontrol.exe
