ESP-LWQX-1000
11
SAFETY INSTRUCTIONS
In this chapter you will find general instructions for the safe handling of this
product.
►
Read this safety information thoroughly and follow all the instructions
carefully.
In the following chapters, warning signs displayed in colour also indicate
hazards that are imminent.
INTENDED USE
The EC cube with LED projection engine is intended for visually replaying
contents for industrial use.
•
Only operate the product in a horizontal position.
•
Only use the product in dry rooms.
•
Observe the permissible environmental conditions (see
„Technical
Specifications“
on page Seite <?>.)
OPERATOR QUALIFICATIONS
Installation and preliminary adjustments should only be performed by
qualified service personnel or authorised service dealers.
GENERAL INFORMATION
►
Carefully observe all warnings on the system parts and in this user's
manual.
►
Carefully follow all the instructions governing the operation and use of our
systems.
►
Observe all the local system installation and operation regulations which
our systems are subject to.
POWER
►
Only use the power cable supplied by eyevis.
►
The power cable must be correctly and securely connected to earthed
power outlets.
►
Do not connect multiple devices to the same power outlet.
►
Do not touch the power plug with wet hands when removing or plugging
the plug into the outlet.
►
Do not forcefully bend or pull the power plug and do not place any heavy
material on it.
►
Do not disconnect the power cable while using the product.
►
To disconnect the device from the mains in an emergency, the plug must
be pulled out from the mains socket. The mains plug must therefore be
easily accessible at all times.
►
Do not overload outlets and cables above their permissible capacity. Do
not use impermissible extension cables.
►
Do not install or operate the device under environmental conditions that
deviate from the technical specifications. This mainly includes areas with
constantly high humidity levels and in direct proximity to water, fire,
radiators or ovens or exposed to direct sunlight or similar. Deviating
operating conditions can lead to electric shocks, fire or can cause the
device to crash.
