Eyecon 9420 Скачать руководство пользователя страница 48

Страница: 48 / 146

Eyecon 9420 & 9430 Instruction Manual

Settings menu

McKesson Enterprise Rx specific information

There are two choices for interfacing with Enterprise Rx.
1.

Our original interface which is uni-directional and does not receive data back

from your Eyecon.

McKesson ADS v3 is a new interface being introduced in early 2021. you will

need to be running E-Rx 10.4 build or a newer release.

• Refer to a separate detailed document that can be provided to you by

your Eyecon Support team to configure the newer McKesson ADS3

interface.

To set up the Eyecon to send the Rx filling results back to the pharmacy system, follow

these steps:
1.

In the

Remote Server menu

on page 53

, set

Send Count Results (Bidirectional):

Enabled

Set the

Remote Server IP address

to the IP address of the computer of the

pharmacy system. Consult your pharmacy software provider for this

information.

Set the

Remote Server Port Number

to the Port that the pharmacy system is

listening to. Consult your pharmacy software provider for this information.

Set the

Remote Server Connect Timeout

. This defaults to 5000 milliseconds

and can be changed if your pharmacy provider requires a different setting.

3.6.2 PMSS Provider:

Tap this

PMSS Provider

to see a scrolling

list of PMSS providers, shown at right.

Swipe up or down to view all of the

available choices. Tap your choice and

press

to accept the change or

Cancel

to abort a change. The screen returns to

the one shown above.

3.6.3 Listening Port

Tap

Listening Port

to see the numeric keypad. Use this to enter the listening port

number the Eyecon will receive Rx Fill requests from the PMSS provider. If the port

number is not known, contact your network administrator or pharmacy software

provider for further assistance. This number must match the port number to which the

pharmacy provider is sending their Rx fill data. The default is 1024 and is used by many

of the pharmacy software providers.
Key in the listening port number. Press

to accept the entry.

Содержание 9420



















































































































































Результаты поиска

Содержание 9420

Отзывы:

Eyecon 9420, Инструкция по эксплуатации, Страница: 48 / 146

Результаты поиска

Содержание 9420

Отзывы: