Eyecon 9420 Скачать руководство пользователя страница 39

Страница: 39 / 146

Eyecon 9420 & 9430 Instruction Manual

3.3 Barcode menu

Rx Scan in Count Mode

Enable this parameter to require a barcode containing the Rx# to be scanned in order

to record an Rx Filling transaction (in both Validation mode and Count Only mode).

When enabled, the [Finish] button is replaced with the following text:, “

Rx Scan Out

Required

”.

When Rx Scan Out is enabled, it is necessary to specify some aspect of the barcodes

that will be used for the Rx Scan Out. This allows the Eyecon to distinguish between a

custom vial label barcode, a stock bottle barcode, or a user ID barcode. The following

parameters in this menu define the two options:
Tap your choice and press OK to accept the change or Cancel to abort a change. The

display returns to the

Barcode

menu.

Rx Contains Alpha

Only enable this parameter if the barcode that contains the Rx# meets the following

criteria:

• The Rx# will contain alpha characters.

AND

• The Rx# varies in length.

OR
• The Rx# will always be 12 characters in length.

(Since UPC barcodes are also 12 digits long, it is important to avoid an Rx# barcode

that is also this length.)

Rx Barcode Detected

Available choices are

Save Only

and

Save and Finish

. Select

Save Only

to allow the

barcode to be scanned before the final count is achieved. Most pharmacies will use the

Save and Finish

option to eliminate the need to press

Finish

Rx Barcode Length

Use this parameter to specify the total length of the barcode that contains the Rx# if the

option for

Rx# Contains Alpha

is disabled. 12 digit Rx barcodes should be avoided

since UPC barcodes contain 12 digits. If the Rx Barcode Length is set to 12 digits, the

Eyecon will save a scan of a new stock item as the Rx# for that transaction instead of

as a scan of an additional stock item.

This feature is typically used when the pharmacy is NOT using the Eyecon’s PMSS

interface and they are NOT using a validation mode barcode that contains Rx #.

Another scenario would be when an alternative number is to be recorded with each

count performed on Eyecon.

Содержание 9420



















































































































































Результаты поиска

Содержание 9420

Отзывы:

Eyecon 9420, Инструкция по эксплуатации, Страница: 39 / 146

Результаты поиска

Содержание 9420

Отзывы: