Eyecon 9420 Скачать руководство пользователя страница 29

Страница: 29 / 146

Eyecon 9420 & 9430 Instruction Manual

3.2 General menu

3.2.3 Auto Close Transaction Recorded Message

The next item in the

General

menu, shown below, allows you to enable or disable the

Auto Close Transaction Recorded Message. Tap your choice and press

to accept

the change or

Cancel

to abort a change.

If enabled, the screen below is displayed saying the transaction has been recorded.

This message will appear briefly after every counting transaction.

If disabled, the alternate message, shown below, is displayed reminding the user to

dispense all of the pills from the tray and into the vial. Press

to proceed in this case.

3.2.4 Drug Substitution

This is the next menu item in the

General

menu.

The Eyecon can substitute a different stock item

(NDC) if you run out of the drug specified in the

Rx fill request. Refer to the following options.

• Touchscree
• If

Disabled

, drug substitution is not allowed

• If

Package Size

is selected, the user will be

prompted to approve the substitution if the package size of the scanned item differs

from the drug specified for the Rx.

Содержание 9420



















































































































































Результаты поиска

Содержание 9420

Отзывы:

Eyecon 9420, Инструкция по эксплуатации, Страница: 29 / 146

Результаты поиска

Содержание 9420

Отзывы: