Extron electronics XTP SR HDMI, Руководство пользователя

Страница: 20 / 54

XTP SR HDMI Scaling Receiver • Operation 14
Operation
This section contains information for front panel operation and configuration of the
XTP SR HDMI and configuration through the On-Screen Display (OSD) menu. Topics in this
section include:
•
Front Panel Features and Indicators
• Rear Panel HDMI Audio Switch
• Audio Output Overview
• On-Screen Display Menu System
•
Front Panel Lockout Mode (Executive Mode)
• Reset Mode
Front Panel Features and Indicators
XTP
HDCP
SIGNAL
AUDIO
HDMI
HBR
S/PDIF
BITSTREAM
ANALOG
LPCM
XTP SR HDMI
MENU ENTER
ADJUST
CONFIG
ADJ
X X X XTP
UST
C D E F G A B
Figure 9. XTP SR HDMI Front Panel
A Power LED indicators
— Lights when power is applied to the unit. There are two
Power LED indicators, one on the front panel and one on the left side of the rear panel.
B Configuration port — If desired, connect a host device to the front panel USB mini-B
port for configuring the scaling receiver.
C XTP indicators:
•
Signal LED indicator — Lights when an active XTP input signal is received.
•
HDCP LED indicator
— Lights when the received input signal is encrypted.
D Audio indicators:
•
HBR LED indicator — Lights when the audio input is high bit rate audio.
•
Bitstream LED indicator — Lights when the embedded audio signal format is a
Dolby
®
Digital, DTS, or 2-Ch Dolby.
•
LPCM LED indicator
— Lights when the embedded audio signal is LPCM-2Ch.
•
HDMI LED indicator — Lights when the HDMI audio output is enabled.
•
S/PDIF LED indicator — Lights when the S/PDIF audio output is enabled.
•
Analog LED indicator — Lights when the analog audio output is enabled.
E Menu button
— Press this button to navigate the OSD menu or enable or disable front
panel lockout mode (see
Front Panel Lockout Mode (Executive Mode)
on
page 22).