XTP R HWP 201 Wallplate Receiver • XTP System Configuration Software
26
Software Operation
The XTP R HWP 201 can be controlled directly from the front panel configuration port (see
figure 8
,
E
on page 10) or remotely from an XTP matrix switcher.
Connections
The XTP System Configuration Software opens to the
Connections
screen. This screen is
used to establish communication with an XTP device through USB connection. Ensure the
receiver is connected and powered on before attempting to connect to it.
Figure 20.
Connections Screen
To connect to a device:
1.
Open the XTP System Configuration Software.
2.
From the
Connections
screen in the XTP Configuration Software, select the
USB
radio
button (see figure 18,
1
).
3.
From the displayed list, select the connected device to be controlled (
2
).
4.
Click the
Connect
button (
3
). The
Device Settings
screen opens (see
Device
Settings
on page 30).
