Extron electronics TPS150 Скачать руководство пользователя страница 48

Reference Information, cont’d

TPS150 Switching and Transmission System • Reference Information

A-4

General

Power ............................................ 90 VAC to 260 VAC, 47 to 63 Hz, internal, autoswitchable

TPT150: 9 watts
TPR150: 20 watts

Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing

Ope32° to +104°F (0° to +40°C) / 10% to 90%, noncondensing

Rack mount

TPT150 ............................... Yes, with included brackets, part #MTR102
TPR150 ............................... No, but projector pole mountable with included L brackets

Enclosure type .............................. Metal
Enclosure dimensions

TPT 150 .............................. 1.7” H x 17.0” W x 11.5” D (1U high, full rack wide)

4.3 cm H x  43.2 cm W x  29.2 cm D
(Depth excludes connectors.  Width excludes rack ears.  Height excludes
rubber feet.)

TPR150 ............................... 1.7" H x 11.75" W x 6.0" D (1U high)

4.3 cm H x 29.8 cm W x 15.2 cm D
(Depth excludes connectors.  Width excludes rack ears.  Height excludes
rubber feet.)

Product weight

TPT150 ............................... 5.2 lbs (2.4 kg)
TPR150 ............................... 2.2 lbs (1.0 kg)

Shipping weight ........................... 13 lbs (6 kg)
DIM weight

USA/Canada .................... 11 lbs (5 kg)
International ..................... 12 lbs (6 kg)

Vibration ....................................... ISTA 1A in carton (International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor

All nominal levels are at ±10%

Specifications are subject to change without notice.

Содержание TPS150





















































Отзывы: