Extron electronics TLP Pro 1022T, Руководство пользователя

Страница: 12 / 33

Panel Features
This section describes:
•
Front Panel Features
•
Rear Panel Features
Front Panel Features
E
D
B
E
TLP Pro 1022M TLP Pro 1022T
E
A C B A C
F F G
A
Communication LED
E
Speakers (2)
B
Status Light
F
Motion Sensor
C
Light Sensor
G
Menu Button (TLP Pro 1022M only)
D
Capacitive Touchscreen
Figure 2.
TLP PRO 1022 Series Front Panels
A
Communication LED — shows the configuration and connection status of the touchpanel:
•
Unlit during normal operation (the touchpanel is configured and connected to an IP Link
Pro control processor).
•
Blinks red if the touchpanel has been configured but is not connected to an IP Link Pro
control processor.
•
Solidly lit if the touchpanel has not been configured.
The indicator can be toggled between enabled and disabled, using the
Setup Menu
(see
page 8).
B Status light — can be programmed to provide system feedback.
•
Light red or green
•
Blink or solidly lit
For information about programming this light, see the
Global Configurator Help File
.
C Light sensor — monitors ambient light level and adjusts screen brightness, based on the
settings configured using the Setup Menu (see page 8).
D
Capacitive touchscreen — 10-inch, 1024x600 resolution capacitive touchscreen with a
touch overlay.
TLP Pro 1022 Series • Panel Features 4