Extron electronics ShareLink 200, Руководство пользователя

Страница: 6 / 23

ShareLink 200 • Operation Using a Computer 10
Connecting to the ShareLink 200 Receiver
Use the software to connect to the ShareLink 200 receiver as follows:
1. Open the ShareLink 200 software. The software searches for available receivers
on your
network
and the Choose a Receiver window opens.
NOTE:
The Other Receivers button allows Wi-Fi users to search and connect
to ShareLink 200 receivers on other Wi-Fi networks (see
Other Receivers
on the
next page for instructions).
Figure 8. Choose a Receiver Window
2.
Select your ShareLink 200 device from the Receiver Name section and click
Connect .
NOTE: The receiver name is shown on the standby screen. If your ShareLink 200
unit is not listed, click the refresh button. If the device still does not appear, click
Manual and enter the receiver IP address manually.
3. If the login window appears, enter the login code into the Code field of the Login
window and click Connect .
NOTE: The login code is shown on the standby screen (see figure 4 on page 5).
Figure 9. Login Window
NOTE: A file can be created for the ShareLink 200 software to connect automatically to
a designated receiver (see Creating a Room File on page 16).
- PSU users must connect manually with the IP address shown on the screen.
158.136.28.9
- Use the four digit code on the screen in the classroom