Extron electronics Quantum Ultra 305 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 111

Extron electronics Quantum Ultra 305 Скачать руководство пользователя страница 24

Quantum Ultra Videowall Processing System • Installation and Configuration

16

HDMI LockIt Cable Lacing Brackets

Four Extron LockIt cable lacing brackets are provided with each
HDMI card for the Quantum Ultra (additional ones can be
ordered). These brackets enable you to secure HDMI input and
output device cables to the HDMI connectors on the cards to
prevent intermittent or complete signal loss due to a loose cable
connection.
Above each connector is a mounting screw, which you can use
to attach the lacing bracket to the Quantum Ultra input and
output cards (see the provided

LockIt HDMI Lacing Bracket Installation Guide

card for

information on attaching the bracket).

Input and Output Cards

The Quantum Ultra 610 chassis contains 10 slots for input and output cards, while the
Quantum Ultra 305, Quantum Ultra Connect 128, and Quantum Ultra Connect 84 have
five.

•

Quantum Ultra 610 and 305:

Each card contains either four HDMI input connectors,

two RJ-45 input connectors on the IN SMD 100 card, four HDMI output connectors,
or four DTP RJ-45 output connectors. Up to four HDMI sources, HDMI displays,
or DTP receivers can be connected to a card, up to the maximum capacity of 40
devices.

•

Quantum Ultra Connect models:

These models are preconfigured with either three

HDMI input cards and two HDMI output cards (Quantum Ultra Connect 128) or two
HDMI input cards and one HDMI output card (Quantum Ultra Connect 84). Each input
and output card has four HDMI connectors. The card configuration cannot be altered
by the user.

The number of input and output cards installed determines how many video inputs and
display outputs are available on your system.

Quantum Ultra 610 and 305:

Multiple Quantum Ultra chassis can be added to the same

project to create very large display arrays. You can remove, replace, and rearrange the
cards in the chassis if desired (see

Replacing Input and Output Cards

for the procedure). To order additional cards, contact your Extron representative.

NOTES:

•

Maximum input capacity is based on an input-output card configuration with one
slot occupied by an output card.

•

Maximum output capacity is based on an input-output card configuration with
one slot occupied by an input card.

HDMI OU

TPU

T

3

Top Mounted

«
...
22
23
24
25
26
...
»

Содержание Quantum Ultra 305
















































































































Отзывы:

Нет отзывов