manualshive.com logo in svg

Extron electronics Quantum Ultra 305, Руководство пользователя, Страница: 21 / 111

Поделиться
Скачать
Extron electronics Quantum Ultra 305 Скачать руководство пользователя страница 21

Quantum Ultra Videowall Processing System • Installation and Configuration

13

Quantum Ultra 610 Front Panel Door

The Quantum Ultra 610 front panel is a door that opens to provide access to 
user-replaceable parts. This front panel door covers the power supplies, fans, and System 
Board Computer (SBC) assembly. 

B

B

B

A

A

A

QUANTUM ULTRA 610

VIDEO WALL PROCESSOR

PRIMARY POWER

OPEN

LOCK

REDUNDANT POWER

FRONT FANS

REAR FANS

STATUS

A

 

Front panel lock

B

 

Status LEDs

Figure 5. 

Quantum Ultra 610 Front Panel Door

The Quantum Ultra 610 front panel door contains the following:

A

 

Front panel lock

 — This lock keeps the front panel door closed, protecting the 

user-replaceable parts. See 

Accessing the Quantum Ultra 610 Front Panel

 on 

page 79 to unlock the door.

B

 

Status LEDs

 — These LEDs indicate the condition of the power supplies and fans. 

They light green while the fans and power supplies are functioning properly. If an item 
ceases to perform, its LED lights red, indicating that the item needs to  be replaced. 

PRIMARY POWER

REDUNDANT POWER

FRONT FANS

REAR FANS

STATUS

Figure 6. 

Front Panel Status LEDs

• 

Primary Power

 — Provides status for the primary (top) power supply.

• 

Redundant Power

 — Provides status for the redundant (bottom) power supply.

• 

Front Fans

 — Provides status for the power supply (front and largest) fan, which 

cools the two power supplies.

• 

Rear Fans

 — Provides status for the six rear fans. If any of these fans fails, the LED 

lights red.

5 

 

6 

 

Содержание Quantum Ultra 305
















































































































Отзывы:

Нет отзывов