Extron electronics MLC 104 IP Plus Series, Руководство пользователя, Страница: 95 / 174

MLC 104 IP Plus Series • SIS
™
Pr
ogramming and Contr
ol
87
Command/Response Table for SIS Commands (continued)
Command ASCII (Telnet)
(host to MLC)
URL Encoded (web)
(host to MLC)
Response
(MLC to host)
Additional Description
Set date/time
24
E X1#
CT
}
W
X1#
CT
|
Ipt •
X1#] X1#
= Local date and time format.
The set format is MM/DD/YY-HH:MM:SS .
Example: 01/31/11-10:54:00 .
Read date/time
E
CT
}
W CT
| X1#] X1#
= Local date and time format.
The Read format is day of week,
DD month year HH:MM:SS .
Example: Thu, 02 May 2013 14:59:35 .
Set GMT offset
24
E X#
CZ
}
W
X#
CZ
|
Ipz
X#] Set the Greenwich Mean Time (GMT) offset
value (
X#
) for the location of the MLC
installation. The leading zero is optional. For
example, 5:30 =
05:30 . Do not use a
plus (+) sign if the GMT offset is positive.
GMT offset (-12.00 to +14.00) represents the time difference in hours and minutes
(+/-hh:mm) relative to Greenwich, England.
Read GMT offset
E
CZ
}
WCZ
| X#]
Set daylight saving time
24
E X3$
CX
}
W
X3$
CX
|
Ipx
X3$]
X3$
= Daylight saving time (DST) is a region-specific 1-hour offset that begins in spring and ends in fall.
0 = off/ignore (default)
1 = USA on – Starting in 2007, DST begins on the second Sunday of March at 2 AM and ends at 2 AM on the first Sunday of November. For example, time in
California is GMT -8:00 from March to November and GMT -7:00 from November to March. However, DST should be turned off in Hawaii, American Samoa, Guam,
Puerto Rico, the Virgin Islands, the eastern time zone portion of the state of Indiana, and the state of Arizona (excluding the Navajo Nation).
2 = Europe on – Begins on the last Sunday in March, ends on the last Sunday in October. DST should be turned off for Iceland.
3 = Brazil on .
Read daylight saving time
E
CX
}
W CX
| X3$]
Set DHCP on 24
E
1 DH
}
W1DH
|
Idh 1
]
Set DHCP off
24
E
0 DH
}
W0DH
|
Idh 0
]
NOTE: Changing DHCP from on to off also resets the IP address to the factory default (192.168.254.254).
View DHCP on/off mode E
DH
}
WDH
| X%] X%
= 0 (off, default) or 1 (on).
Set IP address
24
E X1$
CI
}
W
X1$
CI
|
Ipi •
X1$] X1$
= IP address (xxx.xxx.xxx.xxx). Leading
zeros in each of the four fields are optional in
setting values.
Read IP address
E
CI
}
W CI
| X1$]
Leading zeros in each of the four fields are
suppressed in returned values.
Read hardware address (MAC)
E
CH
}
WCH
| X1*]
or Iph •
X1*]
X1*
= hardware (MAC) address
( 00-05-A6-xx-xx-xx ).
Set subnet mask
24
E X1(
CS
}
W
X1(
CS
|
Ips •
X1(] X1(
= subnet mask (xxx.xxx.xxx.xxx).
Syntax is the same as for IP addresses.
Leading zeros are optional in setting values.
Read subnet mask E
CS
}
WCS
| X1(] Leading zeros are suppressed.
Set gateway IP address
24
E X1$
CG
}
W
X1$
CG
|
Ipg •
X1$] X1$
= IP address (xxx.xxx.xxx.xxx). Leading
zeros are optional.
Read gateway IP address
E
CG
}
WCG
| X1$]