Extron electronics MLC 104 IP Plus Series, Руководство пользователя, Страница: 133 / 174

MLC 104 IP Plus Series • Special Applications 125
In this example, a 2-button switch is configured to have the MLC send e -mail alerts to alerts
to a security desk or to an administrative office when a button is pressed.
1. In the Global Configurator Advanced
Configuration tab, configure the digital I/O
ports (ports 1 and 2 in this example) on the MLC
for digital input, as shown at right.
2. Set up a monitor for each port.
a.
Click the Monitor tab ( ).
b. Click Add Monitor (near the bottom of the GC window). The Monitored
Conditions Wizard window appears.
c. Type in the name of the first monitored condition: Safety office alert .
d. Select Conditions in the
Monitored Conditions area.
e.
Select Digital I/O 1 as the
device.
f. Select Digital I/O Port is
Closed as the Status Command .
g. Click Apply Condition .
h. Select Email in the Monitored
Conditions panel.
i.
Create a notification e-mail if
you have not already done
so.
i. Click Email Manager
(the Email Manager
window opens).
ii. Type in the name,
subject, and main text.
iii. Click Add .
iv.
Click Done to return
to the Monitored
Conditions Wizard
window.
j. If the contact person for this alert is not listed in the Contacts panel, create a
contact entry.
i. Click Contact Manager . The Contacts Manager window opens.
ii.
Type in the recipient name, e-mail address, and company information.