MLC 104 IP Plus Series • SIS
™
Pr
ogramming and Contr
ol
84
Command/Response Table for SIS Commands (continued)
Command
ASCII (Telnet)
(host to MLC)
URL Encoded (web)
(host to MLC)
Response
(MLC to host)
Additional Description
Firmware version, part number, and information requests
NOTE:
Responses to commands differ depending on which, if any, verbose response mode the MLC is in. See the
(
E
X2@
CV
}
setup commands later in this table.
NOTE:
In a query response, an asterisk (
*
) after the version number indicates the version that is currently used.
A question mark (
?
or
?.??
) indicates that the factory default firmware is the only firmware loaded in the MLC.
A carat (
^
) indicates the version of firmware that should be running, but, since a mode 1 reset was performed, the factory default firmware version is loaded and
running instead.
An exclamation point (
!
) indicates that the firmware is corrupted.
Query firmware version number
Q
or
1Q
Q
or
1Q
X1!]
or
Ver01*
X1!]
Show the firmware version (
X1!
) of the MLC
to two decimal places. This query yields the
number of the currently running version of the
user-updatable firmware.
Example:
1Q
1Q
1.01
or
Ver01*1.01
Query verbose firmware version information
0Q
0Q
{r
esponse from 2Q
}–{
response from 3Q
}–{
response from 4Q
}
]
or
Ver00*
{
response from 2Q
}–{
response from 3Q
}–{
response from 4Q
}
]
Show the bootstrap, factory-installed, and
updated firmware versions.
See 2Q, 3Q, and 4Q below.
Example:
0Q
0Q
2.16-1.00(1.57-MLC104IP -Wed, 16 Jan 2003 00:00:00 GMT)-
1.03*(1.74-MLC104IP -Tue, 25 May 2010 19:36:27 GMT)
]
Query firmware version
1Q
1Q
X1!]
or
Ver01*
X1!]
This command shows the currently-running
firmware.
Query bootstrap firmware version
2Q
2Q
X1!]
or
Ver02*
X1!]
The bootstrap firmware is not user-
replaceable, but you may need this
information during troubleshooting.
Example:
2Q
2Q
2.16
]
Query factory firmware version
3Q
3Q
X1!
(
kernel version–model description–date time of upload
)
]
or
Ver03*
X1!
(
kernel version–model description–date time of
upload
)
]
Factory-installed firmware is different from the
bootstrap firmware, but it is also not user-
replaceable. This firmware was installed at the
factory; it is the version the controller reverts
to after a mode 1 reset (see the “Operation,
Features, and Cabling” section).
Example:
3Q
3Q
1.00(1.57-MLC104IP -Wed, 16 Jan 2003 00:00:00 GMT)
]
In this example the factory firmware version
is 1.00 and the IP Link kernel version is 1.57
for the MLC, dated 16 January 2003.
NOTE:
Factory-installed firmware is different from the bootstrap firmware, but it is also not user-replaceable. This firmware was installed at the factory; it is the version the
controller reverts to after a
(see page 31 in “Operation, Features, and Cabling”).
Содержание MLC 104 IP Plus Series
Страница 6: ......