Extron • SENTOSA
xi
LQ & LANCIA
xi
LD • User’s Manual
Lancia/Sentosa Control Software
The Lancia/Sentosa Control Program is Windows® compatible
and provides remote control of the following functions:
•
Input selection
•
Video adjustments
•
Freeze frame control
Installing the Software
The program is contained on a single 3.5” diskette and will run
from the floppy drive. However, it will be more convenient to load
and run it from the hard drive. It can be installed on the user’s
hard-drive as follows:
1.
Insert the Extron software diskette into the floppy drive.
2.
From the Windows Program Manager File menu, click on
Run.
3.
Specify the disk drive and type “setup”. For example, type
A:\SETUP
if the diskette is in drive A.
The program will occupy approximately 1 MB of hard drive space.
The Windows installation will create (by default) a C:\LANCIA
directory and will place 2 icons (LANCIA/SENTOSA Control
Program and LANCIA/SENTOSA Help) into a group titled “Extron
Electronics”.
Using the Software
1.
For information about program features, double click on the
LANCIA/SENTOSA Help ICON in the Extron Electronics
group. [Help can be accessed from its Icon (stand-alone) or
from within the program by the Menu on the Main screen or
by pressing F1 from any point within the program.]
2.
To run the software, double click on the LANCIA/SENTOSA
Control Program ICON in the Extron Electronics group.
3.
A Comm menu will be displayed on the screen. Click on the
Comm Port that is connected to the Lancia
xi
/Sentosa
xi
RS-232 connector.
4.
The Extron LANCIA/SENTOSA Control Program window
displays current input selection and control values (see Figure
3-4 below).
Page 3-4
RS-232/REMOTE Control
Figure 3-4
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
