background image

IPL M PDP-ES • Glossary

IPL M PDP-ES • Glossary

Glossary, cont’d

B-5

B-4

Port number 

is a preassigned address within a server that

provides a direct route from the application to the Transport
layer, or from the Transport layer to the application, of a TCP/IP
system.

Static IP

 refers to an IP address that has been specifically

(instead of dynamically; see DHCP earlier in this chapter)
assigned to a device or system in a network configuration.  This
type of address requires manual configuration of the actual
network device or system and can be changed only manually or
by enabling DHCP.

Transmission Control Protocol/Internet Protocol (TCP/IP ) 

is

the communication protocol (language) of the Internet.
Computers and devices with direct access to the Internet are
provided with a copy of the TCP/IP program to allow them to
send and receive information in an understandable form.

Telnet

 is a utility available on most PCs that allows the

computer system to communicate with one of its remote users/
clients.  A user who wishes to access a remote system initiates a
Telnet session, using the address of the remote client.  The user
may be prompted to provide a user name and password if the
client is set up to require them.

URL encoding 

allows you to send information and commands

to the unit to change its configuration or provide you with
feedback.

im Vertrieb von

            CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201
Fax 07131 911203

[email protected]

Содержание IPL M PDP-ES





































Отзывы: